Hello. We're improving abcam.com and we'd welcome your feedback.

Hello. We're improving abcam.com and we'd welcome your feedback.

Infomation icon

We haven't added this to the BETA yet

New BETA website

New BETA website

Hello. We're improving abcam.com and we'd welcome your feedback.

Take a look at our BETA site and see what we’ve done so far.

Switch on our new BETA site

Now available

Search and browse selected products

  • A selection of primary antibodies

Purchase these through your usual distributor

In the coming months

  • Additional product types
  • Supporting content
  • Sign in to your account
  • Purchase online

Anti-HSV1 + HSV2 gD 抗体 [2C10] (ab6507)

Submit a review Q&A (5)References (24)
Immunocytochemistry/ Immunofluorescence - Anti-HSV1 + HSV2 gD antibody [2C10] (ab6507)
  • Western blot - Anti-HSV1 + HSV2 gD antibody [2C10] (ab6507)

Key features and details

  • Mouse monoclonal [2C10] to HSV1 + HSV2 gD
  • Suitable for: WB, ELISA, ICC/IF
  • Reacts with: Herpes simplex virus, Human herpesvirus 2
  • Isotype: IgG2a

製品の概要

  • 製品名

    Anti-HSV1 + HSV2 gD antibody [2C10]

  • 製品の詳細

    Mouse monoclonal [2C10] to HSV1 + HSV2 gD

  • 由来種

    Mouse

  • アプリケーション

    適用あり: WB, ELISA, ICC/IFmore details

  • 種交差性

    交差種: Herpes simplex virus, Human herpesvirus 2

  • 免疫原

    Tissue, cells or virus corresponding to HSV1 + HSV2 gD.

  • 特記事項

    The Life Science industry has been in the grips of a reproducibility crisis for a number of years. Abcam is leading the way in addressing this with our range of recombinant monoclonal antibodies and knockout edited cell lines for gold-standard validation. Please check that this product meets your needs before purchasing.

    If you have any questions, special requirements or concerns, please send us an inquiry and/or contact our Support team ahead of purchase. Recommended alternatives for this product can be found below, along with publications, customer reviews and Q&As

製品の特性

  • 製品の状態

    Liquid

  • 保存方法

    Shipped at 4°C. Upon delivery aliquot and store at -20°C or -80°C. Avoid repeated freeze / thaw cycles.

  • バッファー

    pH: 7.40
    Constituent: 100% PBS
  • Concentration information loading...

  • 精製度

    Protein A purified

  • ポリ/モノ

    モノクローナル

  • クローン名

    2C10

  • ミエローマ

    NS1/1-Ag4-1

  • アイソタイプ

    IgG2a

  • 軽鎖の種類

    kappa

  • 研究分野

アプリケーション

The Abpromise guarantee

Abpromise保証は、 次のテスト済みアプリケーションにおけるab6507の使用に適用されます

アプリケーションノートには、推奨の開始希釈率がありますが、適切な希釈率につきましてはご検討ください。

アプリケーション Abreviews 特記事項
WB
1/10000.
ELISA
1/102400.
ICC/IF
1/3200 - 1/25600.

1/3,200 (HSV-2) - 1/25,600 (HSV-1).
特記事項
WB
1/10000.
ELISA
1/102400.
ICC/IF
1/3200 - 1/25600.

1/3,200 (HSV-2) - 1/25,600 (HSV-1).

ターゲット情報

  • 関連性

    Herpes simplex virus 1 and 2 (HSV-1 and HSV-2) are two species of the herpes virus family, Herpesviridae, which cause infections in humans. They are also called Human Herpes Virus 1 and 2 (HHV-1 and HHV-2) and are neurotropic and neuroinvasive viruses; they enter and hide in the human nervous system, accounting for their durability in the human body. Under a microscope, HSV- 1 and 2 are virtually identical, sharing approximately 50% of their DNA. Both types infect the body's mucosal surfaces, usually the mouth or genitals, and then establish latency in the nervous system. HSV-1 is commonly associated with herpes outbreaks of the face known as cold sores or fever blisters, whereas HSV-2 is more often associated with genital herpes. Herpes simplex viruses (HSV) use multiple and sequential receptors to enter host cells. HSV glycoprotein D (gD) has been implicated in binding to cellular receptors that facilitate virus penetration into cells. Herpes simplex virus type 1 (HSV-1) glycoprotein D (gD) is an essential component of the entry apparatus that is responsible for viral penetration and subsequent cell-cell spread.

  • 参照データベース

    • 別名

      • Envelope glycoprotein D antibody
      • GD antibody
      • Glycoprotein D antibody
      • US6 antibody

    画像

    • Immunocytochemistry/ Immunofluorescence - Anti-HSV1 + HSV2 gD antibody [2C10] (ab6507)
      Immunocytochemistry/ Immunofluorescence - Anti-HSV1 + HSV2 gD antibody [2C10] (ab6507)

      Immunocytochemistry/Immunofluorescence analysis of vero cells infected with HSV1 (left) or HSV2 (right) labelled with ab6507.

    • Western blot - Anti-HSV1 + HSV2 gD antibody [2C10] (ab6507)
      Western blot - Anti-HSV1 + HSV2 gD antibody [2C10] (ab6507)
      The WB was completed using the HSV-1 Antigen and the HSV-2 Infected Cell Extract at 10 µg/cm

    参考文献 (24)

    ab6507 を使用した論文を発表された方は、こちらまでお知らせください。データシートに掲載させていただきます。

    ab6507 は 24 報の論文で使用されています。

    • Bocharova OV  et al. Aβ plaques do not protect against HSV-1 infection in a mouse model of familial Alzheimer's disease, and HSV-1 does not induce Aβ pathology in a model of late onset Alzheimer's disease. Brain Pathol 33:e13116 (2023). PubMed: 36064300
    • Barnes J  et al. An ESCRT/VPS4 Envelopment Trap To Examine the Mechanism of Alphaherpesvirus Assembly and Transport in Neurons. J Virol 96:e0217821 (2022). PubMed: 35045266
    • Wang Z  et al. Oleanolic Acid Derivative AXX-18 Exerts Antiviral Activity by Inhibiting the Expression of HSV-1 Viral Genes UL8 and UL52. Viruses 14:N/A (2022). PubMed: 35746758
    • Sanchez AD  et al. Receptor Interactome Discovery with RDIMIS, a Membrane Protein Interaction Screen Using Recombinant Extracellular Vesicles. Curr Protoc 2:e483 (2022). PubMed: 35822836
    • Jones LM  et al. Broad-Spectrum Extracellular Antiviral Properties of Cucurbit[n]urils. ACS Infect Dis 8:2084-2095 (2022). PubMed: 36062478
    View all Publications for this product

    レビューと Q&A

    Show All レビュー Q&A
    レビューを送る 質問を送る

    1-5 of 5 Abreviews or Q&A

    Question

    Product code: 43046
    Lot number: GR41258-1
    Inquiry: Hello, I was using your HSV2 gD recombinant protein as a positive control and used 100 ng on a 4-12% Bis-Tris reducing gel and got no signal. I used your ab6507 antibody at 1:1000 as my primary and used the secondary at 1:10000. What amount of protein do you suggest I use? Is using 5 ug going to be a blob? Thank you, Sincerely

    Read More
    Answer

    I am sorry to hear that you have been experiencing problems using this product in the application that you wish.

    In order to assess the quality of our products I would ask that you complete a brief questionnaire relating to the application used. Often it is possible to make suggestions that may help resolve problems experienced using a particular product.

    As our Abpromise indicates, in the event that a product is not functioning in the applications/species cited on the product data sheet (and the problem has been reported within 6 months of purchase) we will happily offer a credit note/refund to the value of the product purchased.

    All our customer feedback, including complaints are monitored weekly by our in house technical support team. If a product is at fault the technical support team will consider removing the product from our catalogue in order to avoid future customer inconvenience.

    Could you provide some further details of the protocol used and complete the following form (attached as a word document). It would be much appreciated if you could attach an image to the response.

    Thank you for your understanding and co-operation in this matter. I look forward to hearing from you soon and resolving this issue as soon as possible.

    Read More

    Question

    Thanks for your reply. Here are the details of the protocol that I followed: Guinea pig fibroblast cells were infected with a recombinant virus with the gene for HSV2gD (from strain 333), HSV1 strain 17Syn+, and HSV2 (strain HG52). The positive controls of HSV were harvested 24 hours post infection; the recombinant virus were incubated until the monolayer was at least 80% infected. The monolayers were harvested using dissociation mix and, after heating at 95 C for 5 minutes, 30 ul of cell lysates were loaded onto a polyacrilimide gel. The gel was transfered to a nitrocellulose membrane (using markers to confirm that the transfer worked). The samples transferred to the membrane included mock infected cells, the backdrop virus, two recombinant virus samples, HSV1 and HSV2. I followed protocol provided in the Western Breeze Kit (anti-mouse) and we have had success with this kit in the past. Again, the dilution used for the HSVgD primary Ab was 1:500. The membrane was incubated for 1 hour with primary Ab the first experimental run. When I repeated the assay, primary Ab incubation was for 3 hours. Both times I performed this Western Blot assay, bands were visible after 1 hour of incubation with the chromogenic substrate only in the lanes containing the recombinant virus samples. In both lanes, a band at 55 KDa and a slightly less intense band just below it were visible on the membrane. No bands were visible in the negative controls, nor in the HSV1 or HSV2 samples. We have a few concerns with these results related to the primary antibody: 1. We used a 1:500 dilution, much more concentration then recommended, yet did not produce a strong signal in the Western Blot. Our lab has had success with this protocol using other antibodies. 2. In repeat Westerns, the postive controls of both HSV1 and HSV2 are not being detected. 3. We have also tried using this Ab in immunofluorescence assays, none which have worked thus far. I appreciate your time and concern with this inquiry, and I believe I supplied all the information I can. Most likely, we are as anxious to understand what is going on as you are, but I cannot invest any more time and due to these time constraints, we are pursuing ordering from another company. Thank you,

    Read More
    Answer

    Thank you for providing these details. When this antibody was characterized in Western blotting with HSV-1 Antigen and the HSV-2 Infected Cell Extract, the antibody worked at dilutions from 1:10,000-1:80,000. As you're seeing a very weak signal using a dilution of 1:500, there definitely seems to be a problem with the antibody that you received. I would be happy to provide you with a free of charge replacement or a refund or credit. Please let me know how you would like to proceed and I look forward to hearing from you.

    Read More

    Question

    Customer is using this antibody in WB with recombinant HSV2gd (strain 333) and after a one hour exposure saw a very faint band at approx 55 kDa. Primary was used at 1:500 and incubated for 1 hr at RT. She also used HSV2 control (strain Hg52) and got no signal. Also used HSV1 - no band. The antibody seems to be detecing recombinant protein, but not endongenous. Lot# 142620

    Read More
    Answer

    Thank you for your enquiry. I was able to obtain the following information from our source for this antibody about how it was tested in Western blotting. Ab6507 was tested using the HSV-1 Antigen and the HSV-2 Infected Cell Extract at 10 micrograms/cm. A band at 55 kDa was detected, and you can see an image of this Western on the online product datasheet (I just added it). They used a general protocol, the only difference that I saw was that a BCIP/NBT detection kit was used. We always suggest using ECL+ as it's more sensitive. Can you tell me more specifics about your samples and your Western protocol? It'll then be easier to see what may be going on with this antibody. Thank you and I look forward to hearing from you.

    Read More

    Question

    We have recently purchased a batch of ab6507 antibody from Abcam (order number 111265). Despite the fact that this antibody used to work fairly well in ELISA in the past (please attached see our recent article where we cited Abcam), this new batch of the antibody is so weak in ELISA. We also compared one of the old batches (same product from Abcam) and the new one and it appeared that the new batch is much weaker than the old one. I would therefore request reimbursing us for this order.

    Read More
    Answer

    Thank you for your e-mail and congratulations on your paper. I can certainly arrange a refund on your recent order of ab6507 if the antibody was purchased in the last 90days and if you could provide your order details. We have not received any other complaints about this antibody so it may have been damaged during shipping or storage; as you have tested the new lot with old lots in parallel this indicates that the rest of your experiment is working well and the antibody is damaged. Can I please also suggest you submit an Abreview on the antibodies you have used and in return we will offer you 50 Abpoints per Abreview which can be redeemed on a number of rewards (a further 100 Abpoints will be offered for an image/figure). I look forward to hearing from you regarding your order details,

    Read More

    Question

    Dear Technical expert: I would like to do immunofluorescence using your mouse monoclonal to HSV gD --ab6507 (clone # 2C10). Which fixatives are compatible with this antibody, and which of these is prefered? (i.e. 4% Paraformaldehyde in PHEM OR 100% Methanol OR %100 Acetone, OR 50:50 acetone methanol, etc). Thanks for your response.

    Read More
    Answer

    I assume that you are doing frozen section work. 100% acetone for 10 minutes is usually a good fixative for this purpose. Aside, use PBS to dilute the antibody and for washes.

    Read More

    Please note: All products are "FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES"
    For licensing inquiries, please contact partnerships@abcam.com